+86-028-85255257
400G QSFP56 DD SR8 Active Optical Cable
Features
¨ 8 channels full-duplex transceiver modules
¨ Transmission data rate up to 53Gbps per channel
¨ 8x53Gbps PAM4 transmitter and PM4 receiver
¨ 8 channels 850nm VCSEL array
¨ 8 channels PIN photo detector array
¨ Internal CDR circuits on both receiver and transmitter channels
¨ Power consumption <10W per end
¨ Hot Pluggable QSFP DD form factor and Compliant with CMIS
¨ Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF with FEC
¨ Built-in digital diagnostic functions
¨ 3.3V power supply voltage
¨ RoHS compliant(lead free)
¨ Case operating temperature
Commercial:0 ~ +70℃
Industrial:-40 ~ +85℃
Applications
¨ IEEE 802.3cd200GBASE-SR4
Description
The F-tone Networks TechnologiesFTQD-4H-SR8-QD-Oxxx is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x200Gigabit Ethernet Applications. This AOC is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates eight data lanes in each direction with 8x26.5625GBd. Each lane can operate at 53.125Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiberwith FEC.These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 76 contact edge type connector. The Common Management Interface Specification (CMIS) for QSFP DD modules, This module incorporates F-tone Networks Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Ordering information
Part Number |
Product Description |
FTQD-4H-SR8-QD-Oxxx |
QSFP DD, 2x200GBASE-SR4 AOC,70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF ,with DSP Power consumption <10W ,0ºC ~ +70ºC |
FTQD-4H-SR8-QD-OxxxI |
QSFP DD, 2x200GBASE-SR4 AOC,70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF ,with DSP Power consumption <10W ,-40ºC ~ +85ºC |
xxx |
005-5m, 020-20m, 050-50m, 100-100m |
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.