- Contact Us：
-
+86-028-85255257
- sales@f-tone.com
標準光模塊
標準協議光模塊
- 全國產化光模塊
- 25G~400G高速光模塊
- 200km超長距光模塊
- 5G移動通信光模塊
- SFP光模塊
- CWDM SFP
- DWDM SFP
- BIDI-SFP
- SGMII SFP
- Video SFP光模塊
- Copper SFP
- 低功耗SFP
- SFP+光模塊
- CWDM SFP+
- DWDM SFP+
- BIDI SFP+
- Tunable SFP+
- 16GFC SFP+
- 25GE SFP+
- 32GFC SFP+
- SFP28光模塊
- SFP56光模塊
- SFP-DD光模塊
- QSFP光模塊
- QSFP+ 光模塊
- QSFP28光模塊
- QSFP56光模塊
- QSFP112 400G光模塊
- QSFP224光模塊
- QSFP-DD光模塊
- QSFP-DD800光模塊
- OSFP 400Gbps
- OSFP 800G光模塊
- OSFP 1.6T光模塊
- HSFP 1.6T~12.8T光模塊
- XFP光模塊
- CWDM XFP
- DWDM XFP
- BIDI XFP
- 1x9光模塊
- CSFP光模塊
- CSFP+10G光模塊
- CXP光模塊
- CFP光模塊
- CFP2光模塊
- CFP4光模塊
- CFP8 400Gbps
- CDFP 400Gbps
- MicroQSFP光模塊
- DSFP光模塊
- FT-61光模塊
- OLT光模塊
- ONU光模塊
- PLCC光模塊
- RJ光模塊
- SFF光模塊
- SNAP12光模塊
- USOT光模塊
- X2光模塊
- Xenpak光模塊
- 光電編碼器模塊
- 光模塊測試板
- 光模塊籠子座子
- DAC 高速線纜
- 光纖滑環|光電滑環
- 光纜車
- 軍品級DIN光模塊
- 塑料光纖模塊
- 替換安華高工業電力光模塊
- 兼容國產化替換安華高光耦
- 射頻光模塊
- 微型多路光模塊
- 特種光模塊
- 特種光纖連接器
- 特種光電連接器
- USB光纖延長線
- HDMI
- 特種電連接器
- 特種光纖光纜
- 光藕
- SMA測試線纜
- OSA
- PON BOSA
- Pigtailed PD
- RFoG BOSA
- TO-CAN
- 光纖溫度傳感器
- 光纖應變傳感器
- 光纖加速度傳感器
- 光線壓力傳感器
- 光纖位移傳感器
- 光纖應力傳感器
- 光纖傳感分析儀
- 光纖分布式測溫主機
- 光纖布里淵信號解調儀
- 分布式光纖聲振信號解調儀
- Camera Link
技術支持
兼容協議光模塊
- 華為光模塊
- 思科光模塊
- 華三光模塊
- 中航光電光模塊
- 中興光模塊
- 銳捷光模塊
- 惠普光模塊
- 神州數碼光模塊
- Juniper光模塊
- Extreme光模塊
- Brocade光模塊
- D-Link光模塊
- 赫思曼光模塊
- 阿爾卡特朗訊光模塊
- Allied Telesis光模塊
- Foundry光模塊
- Force10光模塊
- Blade光模塊
- Linksys光模塊
- Marconi光模塊
- 博達光模塊
- 網件光模塊
- Nortel光模塊
- Moxa光模塊
- ?？低旽IKVISION光模塊
- McAfee光模塊
- SMC智邦光模塊
- 安華高Avago光模塊
- 飛通光模塊
- Finisar光模塊
- yellobrik SDI光模塊
- 羅克韋爾AB光模塊
- 羅杰康光模塊
- 研華Advantech光模塊
其它種類光器件
- 全國產化光器件
- 光纖陣列系列
- 高速模塊微連接
- 相干通訊光連接
- 硅光子器件光鏈接
- Bio-Medical Equipment
- Components for Fiber Laser
- Components for Fiber sensing
- Components for Optical Network
- EDFA光纖放大器
- 光纖傳感器
- High power Component
- Hybrid for EDFA
- Test Equipment & Others
- Test Equipment & Others
- 保偏光器件
- 光分路器
- 光開關
- 探測器
- 光功率計
- 全光纖相位拉伸器
- 光纖準直器
- 光衰減器系列
- 光偏振控制器
- 光源
- 光環行器Circulator
- 光纖延遲線
- 色散補償模塊
- 光纖放大器
- 無源傳輸轉換器
- 光纖激光器
- 光調制器
- 光電探測器
- 光纖偏振
- 光纖濾波器
- 同軸激光器
- 同軸電纜
- 光纖法蘭適配器
- 光纖跳線&尾纖
- SMA-特殊纖芯系列
- 特殊接頭系列
- 鎧裝系列
- 光耦合器Coupler
- 皮纖跳線系列
- 大芯數系列
- 回路跳線系列
- 保偏光纖系列
- 光通信組件
- 光隔離器isolator
- 其它光器件
- 可調濾波器
- 可調衰減器
- 拉錐耦合器
- 無源光器件
- 法拉第旋轉鏡
- 波分復用器
- 濾波器
- 蝶形激光器
- 光耦合器&分路器
- 光纖環形器&法拉第旋轉鏡
- 光纖隔離器&波分復用器
- 光纖分束器&合束器（PBS/PBC）
- 光纖光柵
- 高速線纜
CFP-100G-SR10
Specifications
- 產品型號: CFP-100G-SR10
- 兼容品牌: 全系列
- 封裝類型: CFP
- 傳輸速率: 100G
- 傳輸距離: OM3 300M / OM4 400M
- 發射波長: 850nm
- 接收波長: 850nm
- 工作溫度: 商業級0℃～+70℃/工業級-40℃～+85℃ 可選
- 數字診斷: 帶DDM
- 接收靈敏度: OM3 300M / OM4 400M
- 接收靈敏度: OM3 300M / OM4 400M
Description
F-tone 100G CFP SR10 Optical Transceiver Module
Features
- Transmission data rate up to 11.2Gbit/s per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
- Up to 11.2 Gbps per channel bandwidth,
- OTU4 compatible
- 10 channels 850nm VCSEL array
- 10 channels PIN photo detector array
- OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0°C to +70°C
- 3.3V power supply
- RoHS 6 compliant(lead free)
Applications
- High-speed core router interlinks and data center aggregation
- Test equipment
Description
The CFP optical transceiver module are a high performance, low power consumption, short reach(1m to 100m) interconnect solution supporting 100G Ethernet and PCIe. It is compliant with the CFP MSA and IEEE P802.3ba 100GBASE-SR10. F-tone CFP SR10 modules offer 10 transmit and 10 receive asynchronous channels operating at up to 11.2Gbps per channel.
As shown in Figure 1, the transmitter side of the module consists of an array of VCSELs (Vertical Cavity Surface Emitting Lasers) and associated circuitry, which converts 10 parallel electrical data inputs to 10 parallel optical data output signals and also converts 10 parallel optical signals into 10 parallel electrical signals through an array of PIN photodiodes and associated circuitry.
Absolute Maximum Ratings
|
Parameter |
Symbol |
Min |
Max |
Unit |
|
Supply Voltage |
Vcc |
-0.3 |
3.6 |
V |
|
Input Voltage |
Vin |
-0.3 |
Vcc+0.3 |
V |
|
Storage Temperature |
Tst |
-20 |
85 |
oC |
|
Case Operating Temperature |
Top |
0 |
70 |
oC |
|
Humidity(non-condensing) |
Rh |
5 |
95 |
% |
Recommended Operating Conditions
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
|
Operating Case temperature |
Tca |
0 |
70 |
oC |
|
|
Data Rate Per Lane |
fd |
- |
11.2 |
Gbps |
|
|
Humidity |
Rh |
5 |
85 |
% |
|
|
Power Dissipation |
Pm |
8 |
W |
Electrical Characteristics
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Differential input impedance |
Zin |
90 |
100 |
110 |
ohm |
|
Differential Output impedance |
Zout |
90 |
100 |
110 |
ohm |
|
Differential input voltage amplitude |
ΔVin |
120 |
820 |
mVp-p |
|
|
Differential output voltage amplitude |
ΔVout |
300 |
820 |
mVp-p |
|
|
Input Logic Level High |
VIH |
2.0 |
VCC |
V |
|
|
Input Logic Level Low |
VIL |
0 |
0.8 |
V |
|
|
Output Logic Level High |
VOH |
VCC-0.5 |
VCC |
V |
|
|
Output Logic Level Low |
VOL |
0 |
0.4 |
V |
Note：
1. Differential input voltage amplitude is measured between TxnP and TxnN.
2. Differential output voltage amplitude is measured between RxnP and RxnN.
Optical Characteristics
Transmitter Optical Specifications (T = 25°C, VCC =3.3V +/- 5%)
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Average Optical Power(per channel) |
Pout |
-8 |
-2.5 |
+1 |
dBm |
|
Average Optical Power(per channel) - Disabled |
Poff |
-30 |
dBm |
||
|
Optical Return Loss Tolerance |
12 |
dB |
|||
|
Extinction Ratio |
ER |
3 |
dB |
||
|
Center Wavelength |
λc |
840 |
850 |
860 |
nm |
|
RMS Spectral Width |
λ |
0.5 |
0.65 |
nm |
|
|
Transmitter eye mask |
Compliant to IEEE802.3ba eye mask specification |
||||
Note：
1. Average optical power is measured at the output of the modules optical interface.
Receiver Optical Specifications (T = 25°C, VCC =3.3V +/- 5%)
|
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Optical Power Sensitivity(per channel) |
Pin min |
-12 |
-9.9 |
dBm |
|
|
Optical Power Saturation(per channel) |
Pin max |
+1 |
dBm |
||
|
Stressed Receiver Sensitivity |
PS |
-5.4 |
dBm |
||
|
Center Wavelength |
λc |
840 |
850 |
860 |
nm |
|
RMS Spectral Width |
λ |
0.5 |
0.65 |
nm |
|
|
Optical Return Loss |
Rl |
12 |
dB |
||
Note：
- Optical power sensitivity is measured with BER@10<sup< a="">>-12 at 10.3125Gbps per channel.
Related Products
QSFP-40G-SR4
- 4 independent full-duplex channels
- Up to 11.2Gbps data rate per channel
- MTP/MPO optical connector
- QSFP+ MSA compliant
- Digital diagnostic capabilities
- Capable of over 100m transmission on OM3 multi-mode ribbon fiber
- CML compatible electrical I/O
- Single +3.3V power supply
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- XLPPI electric interface (with 1.5W Max power)
- RoHS-6 compliant
QSFP-40G-LR4
- Compliant with 40G Ethernet IEEE802.3ba and
- 40GBASE-LR4 Standard
- QSFP+ MSA compliant
- Compliant with QDR/DDR Infiniband data rates
- Up to 11.2Gbps data rate per wavelength
- 4 CWDM lanes MUX/DEMUX design
- Up to 10km transmission
- Operating case temperature: 0~70C
- Maximum 3.5W operation power
- RoHS compliant
CFP2-100G-SR10
CFP2-100G-SR10 CFP2, 850 nm, 3.3 V, 100GBASE-SR10 Compliant Pluggable Ethernet Optical Transceiver
CFP-40G-SR4
- Transmission data rate up to 11.2Gbit/s per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 40GBASE-SR4 links
- Up to 11.2 Gbps per channel bandwidth,
- OTU3 compatible
- 4 channels 850nm VCSEL array
- 4 channels PIN photo detector array
- OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0°C to +70°C
- 3.3V power supply
- RoHS 6 compliant（lead free）
CFP-40G-LR4
- Transmission data rate up to 11.2Gbps per channel
- CFP MSA compliant
- Compliant to IEEE 802.3ba specification for 40GBASE-LR4 links
- OTU3 compatible
- 1310nm Un-cooled CWDM DFB-DML ,Transmitter and optical MUX
- High Sensitivity PIN-TIA and optical DEMUX
- 1271, 1291, 1311, 1331nm CWDM grid in ITU-T G.694.2 up to 10km over a SMF
- MDIO digital diagnostic and control capabilities.
- compliant to CFP MSA Management Interface Specification, Draft 1.4
- TX input and RX output CDR retiming
- Hot pluggable electrical interface
- Power class 1 (<8W max)
- Operating case temperature 0°C to +70°C
- 3.3V power supply
- RoHS 6 compliant（lead free
CXP-120G-SR12
- 12-channel full-duplex transceiver module
- Hot Pluggable CXP footprint
- Maximum link length of 300m on OM3 or 400m on OM4 Multimode Fiber (MMF)
- Multirate capability: 1.06Gb/s to 10.5Gb/s per channel
- Unretimed CPPI electrical interface
- Requires 3.3V power supply only
- Low power dissipation: <3.5W
- Reliable VCSEL array technology
- Built-in digital diagnostic functions
- Commercial operating case temperature range: 0°C to 70°C
- Single MPO connector receptacle
- RoHS-6 Compliant (lead-free)