+86-028-85255257
SFP Transceiver,MM,1310nm,1.25G,2km
Description
The SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 2KM transmission distance with MMF.The transceiver consists of three sections: a 1310nm FP LD laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.
The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Features
● Data-rate of 1.25Gbps operation
● 1310nm FP LD laser and PIN photodetector
● Compliant with SFP MSA and SFF-8472 with duplex LC receptacle
● Digital Diagnostic Monitoring:Internal Calibration or External Calibration
● 2km transmission with 50/125μm MMF
● 1km transmission with 62.5/125μm MMF
● Compatible with RoHS
● +3.3V single power supply
● Operating case temperature:
Standard : 0 to +70°C
Industrial : -40 to +85°C
Applications
● Gigabit Ethernet
● Fiber Channel
● Switch to Switch interface
● Switched backplane applications
● Router/Server interface
● Other optical transmission systems
Absolute Maximum Ratings
Table 1 - Absolute Maximum Ratings
Parameter |
Symbol |
Min |
Max |
Unit |
Supply Voltage |
Vcc |
-0.5 |
4.5 |
V |
Storage Temperature |
Ts |
-40 |
+85 |
°C |
Operating Humidity |
- |
5 |
85 |
% |
Recommended Operating Conditions
Table 2 - Recommended Operating Conditions
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
|
Operating Case Temperature |
Standard |
Tc |
0 |
+70 |
°C |
|
-20 |
+85 |
|||||
industrial |
-40 |
+85 |
°C |
|||
Power Supply Voltage |
Vcc |
3.13 |
3.3 |
3.47 |
V |
|
Power Supply Current |
Icc |
300 |
mA |
|||
Data Rate |
1.25 |
Gbps |
Optical and Electrical Characteristics
Table 3 - Optical and Electrical Characteristics
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Notes |
||
Transmitter |
||||||||
Centre Wavelength |
λc |
1310 |
nm |
|||||
Spectral Width (RMS) |
?λ |
0.85 |
nm |
|||||
Average Output Power |
Pout |
-5 |
0 |
dBm |
1 |
|||
Extinction Ratio |
ER |
9 |
dB |
|||||
Optical Rise/Fall Time (20%~80%) |
tr/tf |
0.26 |
ns |
|||||
Data Input Swing Differential |
VIN |
400 |
1800 |
mV |
2 |
|||
Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|||
TX Disable |
Disable |
2.0 |
Vcc |
V |
||||
Enable |
0 |
0.8 |
V |
|||||
TX Fault |
Fault |
2.0 |
Vcc |
V |
||||
Normal |
0 |
0.8 |
V |
|||||
Receiver |
||||||||
Centre Wavelength |
λc |
1310 |
nm |
|||||
Receiver Sensitivity |
-20 |
dBm |
3 |
|||||
Receiver Overload |
0 |
dBm |
3 |
|||||
LOS De-Assert |
LOSD |
-21 |
dBm |
|||||
LOS Assert |
LOSA |
-35 |
dBm |
|||||
LOS Hysteresis |
1 |
4 |
dB |
|||||
Data Output Swing Differential |
Vout |
400 |
1800 |
mV |
4 |
|||
LOS |
High |
2.0 |
Vcc |
V |
||||
Low |
0.8 |
V |
Notes:
1. The optical power is launched into MMF.
2. PECL input, internally AC-coupled and terminated.
3. Measured with a PRBS 27-1 test pattern @1250Mbps, BER ≤1×10-12.
4. Internally AC-coupled.
Timing and Electrical
Table 4 - Timing and Electrical
Parameter |
Symbol |
Min |
Typical |
Max |
Unit |
Tx Disable Negate Time |
t_on |
1 |
ms |
||
Tx Disable Assert Time |
t_off |
10 |
μs |
||
Time To Initialize, including Reset of Tx Fault |
t_init |
300 |
ms |
||
Tx Fault Assert Time |
t_fault |
100 |
μs |
||
Tx Disable To Reset |
t_reset |
10 |
μs |
||
LOS Assert Time |
t_loss_on |
100 |
μs |
||
LOS De-assert Time |
t_loss_off |
100 |
μs |
||
Serial ID Clock Rate |
f_serial_clock |
400 |
KHz |
||
MOD_DEF (0:2)-High |
VH |
2 |
Vcc |
V |
|
MOD_DEF (0:2)-Low |
VL |
0.8 |
V |
Mechanical Dimensions
Ordering information
Part Number |
Product Description |
FTCS-1312-02D |
SFP 1.25G 1310nm MMF 2km DDM(Option) 0oC ~ +70oC |
FTCS-1312-02DI |
SFP 1.25G 1310nm MMF 2km DDM(Option) -40oC ~ +85oC |
北億纖通 | F-tone Networks
企業郵箱:sales@f-tone.com
企業網站:www.f-tone.com
企業網站:m.registeredaddresses.com
企業電話:028-85255257
企業傳真:028-85977702
注:本產品有全國產化型號可選
本產品為1.25G SFP系列光模塊,僅展示部分參數,如有需要,請聯系我們。
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.